Introduction to rewinder conditioning technology and rewinding technology

Release time:

Feb 18,2023

1. Adjust the transfer bezel to the appropriate distance (by tightening the manual button under the transfer bezel). Load the perforated coated paper roll into the paper feeder, pass the paper through the paper shaft, press it with a rubber roller, adjust both ends of the slitting roller, adjust the hand turn to the appropriate pressure (the clockwise pressure is small, and vice versa), and then start the electric knob, adjust the speed from slow to fast, and use the speed difference between the fast and slow rollers to separate the coated paper.

2. Adjust the feed tape (you can use either one) so that the rewinder aligns with the perforated side of the coated paper roll. According to the size of the paper to be cut, adjust the handwheel on the operating surface so that the distance between the two sets of paper pressing rollers is suitable. (Shake clockwise The distance between the two rollers becomes smaller, otherwise it becomes larger.) When installing the skewers, turn to the perforated side of the coated paper roll and adjust the angle.

The paper rolls rolled out by the rewinder are relatively soft and may be damaged or broken inside. The edges on both sides are irregular and the paper width is too large to be used directly in paper processing or printing presses. Most papers (newsprint, letterpress, wrapper, etc.). The paper core must be trimmed, cut, joined and rewound to form a finished paper roll with the appropriate specifications and tightness requirements before leaving the factory.

The rewinding process of the winder mainly accomplishes three tasks:

First, cut off the base paper burrs;

Second, cut the entire base paper into several widths that meet the user's specifications;

Third, control the roll diameter of the finished paper roll to make it meet the factory specifications.

The automatic trimming, glue, sealing and shaft pulling of the rewinder are completed synchronously, so that there will be no paper loss when the rolling paper is transferred to the band saw to cut and package; Each shaft has a separate tension adjustment mechanism for pneumatic feeding, rewinding reels and base paper.

Paper machine, as the name implies, is a kind of equipment used for papermaking, and the emergence of this equipment brings great convenience to our lives, and what parts are composed of this magical equipment? In view of this, the paper machine manufacturer - Haitian Paper summarized a few points, I hope it can be helpful to you.

Paper machine common failure analysis

The performance of the paper machine control system is the premise of determining whether a paper machine can produce with high efficiency and high quality, and for a normal paper machine, in order to ensure its continuous high efficiency and high quality production, the maintenance of the transmission system is particularly important.

What is a slitter rewinder's cleaning device?

The slitter rewinder includes a rack equipped with a paper stock rack, a paper feeding mechanism, a rewinding station, a paper cutting tube station and a conveyor mechanism.

Routine maintenance measures for rewinders

A rewinder is a kind of papermaking equipment. After the paper passes through the equipment, it is made into finished paper and leaves the factory. At present, the use of AC drives instead of DC drives in equipment has become a development trend in the tissue processing equipment industry.

Corrugated beam steel guardrail

The project department has established a leading organization for safety management, and established and improved the safety production responsibility system of departments at all levels, and the responsibility is implemented to people

Paper machine basic classification

According to the needs of the copying process, the structure of the paper machine is diverse, generally composed of flowing, forming, pressing, drying, finishing, winding and transmission and auxiliary equipment and other supporting equipment.