斜网特种纸机

categories of news

Product Categories

contact us

Shandong Haitian paper machinery co. LTD

General manager: guo donglei

Contact person of paper machine: shang zhenxi 13589536936 bi yankai 13953324900

Rewinding machine contact person: li weidong 13335129266

Address: no. 320, xinghua road, zibo wang village, shandong province

Zip code: 255311

Telephone: 0533-6682000/6682999

Fax: 0533-6680898

Website: www.haitianjx.com www.haitianmachinery.com

Email:haitianjx@126.com


Maintenance and troubleshooting of rewinding machine

Your current location: Home page >> News >> Company news

Maintenance and troubleshooting of rewinding machine

Release date:2018-06-19 Author: Click:

复卷机.jpg

There are two steps to troubleshoot the toilet paper rewinding machine:

1. The photoelectric protection function of a fully opened toilet paper production and processing equipment fails. After emergency treatment, the machine can still work.

2. Remove the circuit board and conduct visual inspection. The base plate around the power bridge pile was found to be discolored. It was determined that the bridge pile was burnt out. Measured with a multimeter, the new bridge pile has also burned out, judging from the short circuit part. Check the components one by one from the bridge stack and find that a three-terminal stabilizer block (7805) has been punctured. Replace the purchased components and the power indicator light on the circuit board is on after charging. The operator installed the circuit board on the machine and followed the normal procedure to check whether the photoelectric protection function was working. The operator covered the eyes with his hand and stopped the falling knife immediately.

Maintenance:

1. The drive device of toilet paper rewinding machine, such as gear chain, needs to be butter over time.

2. Rewinding machine generally not a problem, consumable parts are nothing more than a few small gear, if combined with a print knife easily broken, wool roller after using gears will become thin, need back to factory renovation, if need to replace the steel roller embossing device have embossed pattern, you need to put steel roll back to original factory modified is ok, not much money.

3. Pay attention to the stable mechanical and electrical pressure of the rewinding, otherwise it will burn the motor easily. Pay attention to hygiene, do not let debris fall between the steel roll and the wool roll.


This article URL:http://en.haitianjx.com/news/434.html

Key words:复卷机,造纸机,斜网特种纸机

Recently Viewed: